Showing posts with label transmission components. Show all posts
Showing posts with label transmission components. Show all posts

Friday, 22 September 2017

A Quick Glance on the Transmission Gears and Shafts


Transmission is a procedure in which the fuel energy converts into a mechanical energy, which drives forward a car purposefully. Everybody knows that energy is the source of power and power is the potential in any mechanism to run the engine.

v  What is a Transmission?

The transmission is the conversion of the energy, which is derived from the fuel to gear up the speed and motion in a car. This transformation of the energy into useful power fluctuates as per the driving requirement. This change becomes low if the speed is reduced and it becomes high if the vehicle increases its speed. This transmission gears and shafts is a combination of the connection of the engine, gear, and shaft, which are interlinked inside the bonnet.


v  Transmission in the Gears

Gears are usually meant for taking up motion and speed to the car. All the six gears mean several speed manuals and it transmits from lower to higher speed according to the speed capacity of the car. This procedure can change itself from one condition to other with the variant usage of the fuel and power consumption.

This transformation of energy in gear can be manual or automatic. If the transformation is done in the handbook process, then it naturally consumes more power and fuel.

On the other hand, the automatic gear sets a particular speed ratio depending on the load on the carriage. It reduces the fuel consumption as the rate ratio is fixed and does not fluctuate unless the vehicle is set out of the auto gear mode.

v  Transmission in the Shafts

In crankshaft of the engine, the gear is changed automatically. Now the shaft itself is subject to the manual changes because it specifies the direction of the car and is connected to the engine, so the gear. Therefore, the shaft is somehow internally attached to the apparatus through the engine. Therefore, motion and direction are internally and externally connected through the shaft and gear quite correctly.

For the modification of the transmission gears and shafts, it is necessary to continue research on the betterment of the parts of the engine, which regulates all these activities of a vehicle from the core.



Thursday, 21 September 2017

The Functions of the Transmission Components

The transmission is the act of transformation of the energy into such a power, which can drive a vehicle through motion. Usually, the battery is the storage of energy in a vehicle. This energy is used for the transformation into power with the help of the fuel energy. The change is not easy, but it is done in a quite complicated way and through some machinery. In this procedure of transformation, fuel energy is transmitted into some electric energy to run the engine
      The Transmission Procedure
The procedure of this method is a bit step related. There are a few transmission components that help to execute the entire action and results into fulfilling its actual purpose. Those components controls following transmissions-

1. The Set of Gears
The speed ratio is controlled through the gears. The transferable elements also monitor the activity of the gears that regulated the up gradation of the motion of the vehicle.
2. Hydraulic System
This system is controlled by one of the transferable element, which is derived from the fluid in the oil chamber. This transmission controls the bend and pressure of the clutches in the vehicle
3. The Safety of the Gaskets
The transferable elements also manage the seals of the oil tank and ensure its safety from leaking out.
4. Torque Transmitter
The torque transmitter allows mounting the clutch to stop the vehicle while running on some gear.
5. Computing
It helps to shift the direction of the vehicle with the electrical solenoid to keep the change of the flow of the oil into its exact location to run the machine continually.
      The Work on the Elements
The present world is the world of betterments. It’s the duty of the manufacturer to work for the betterment of the transmission components. If these items are of the high quality and installed in the correct manner, then it can give the desired and even the better result in the normal execution of the purpose. The elements have to be used and maintained in the methodical way to gain the best result from it. The duty belongs to both the user and the manufacturer.

Wednesday, 20 September 2017

Transmission Gears and Shafts in the Movement of the Vehicle.

Transmission gears and shafts are the parts of components of an automobile engine. They are pieces to pass on the transmitted power in the movement of the engine. Thus eventually, the power is transferred to the four wheels of the vehicle.

The Motto of the Parts

A vehicle collects its vital energy from the fuel. The primary job of the engine components is to convert the energy into the power. In this procedure, the transmission gears and shafts contribute their roles in taking up the speed and turn of the vehicle into the predetermined direction. The power in the form of the course gets transferred through these components to the wheels.


The Facilities provided with these components

The transmission gears and shafts provide the following facilities along with their actual contribution to the engine.
    It has heat management system that prevents the gas carburizing.
    The teeth in it have the grinding features in conventional form.
    It controls the taken up speed at the point of reduction. It releases pressure from the engine and empowers the wheels.

These components are set in the proper position in the engine’s assembly. The proper set up and regular usage of them can make the components purposeful and durable.


Tuesday, 19 September 2017

Uses of Gears and shafts in defense industry

Apart from its use in automobile industry gears and shafts has many uses in the defense industry. There are lots of technical advancement in this field hence the advance development are more or less related to the types of gears and shafts used in different ways. Gears are indeed required and are the center of all the advancement and form an integral part of the defense industry. Gears are used to ensure the proper usage of various kinds of weapons and equipment.


In defense, it is also useful in marine and navy field for the manufacturing of different hatches and boat that works in water. Not only this but also used on a large basis in the construction and operation of the submarines and the ships. The best use of gears and shafts is for the better operations and fast speed of the unit. AVTEC  http://www.avtec.in/  are the largest manufactures of these shafts and ears with Indian roots and global presence.

Transmission Components: What and Why?

Transmission components in a machine are the parts that work together to transmit power from one part of the device to another part or parts. In automobiles, one such transmission system is the engine transmissions components system that transmits energy from the engine to the driving wheels. The transmission components can be of various types based on the kind of transmission system involved. Some of these components can be named as, clutch, gears, shafts, flywheel, chain, ratchet, sprocket, powertrain, flywheel, universal joints, propeller shaft, axle, differential, etc.

There are various manufacturers of transmission components that provide high-quality parts at a low price.
Applications -
    A transmission system has a variety of applications, such as driving mechanisms in cars, in wind turbines, etc.
    Transmission components have found their use in agricultural, construction, automotive, industrial, and mining.

    In addition to the normal gear equipped system, these systems find extensive use of hydro-static drive and electrical adjustable-speed drives.

Monday, 18 September 2017

Get an Idea about Transmission Components

The part of the engine is connected somehow with the parts of the wheel. Everybody knows that the wheels cannot move until the power comes from the engine. The connecting parts of the wheels and the engine transmit the power from the engine to the spinning wheels. Transmission components help in this transformation of the power.
·         How the Transmission Works
The transforming power originates in the engine and gets a pass on to the wheels. It motivates the rotation of the wheels per minute. The arrangements of transmission components are different in the all-wheel driven car; front wheel drove car and back wheel drive the car.

ü  The Parts Used in this System
The parts that help in the transferring the power from the engine to the wheels are-
1. Planetary Set of Gears
This set of gears works in cooperation and contributes to keep up the RPM ratio intact. This system has a set up like our planetary system-a central part (the sun) surrounded by two smaller parts (the planets).
2. Hydraulic System
The hydraulic system helps in controlling the shifting of the gears. At the same time, it monitors the fluid while the transformation of the power.
3. Torque Converter

This part of the transmission component is found on the automatic cars. It takes the job of the clutch in that.

Saturday, 16 September 2017

The Targets of the Transmission Parts Manufacturer

Transmission of energy is vitally necessary to use it to perform any mechanical work with the machinery devices. Everybody knows that the energy is the source of the power in any device and motor system. But to use the power it has to be transformed into a form, which can use its potential to execute the intended purpose of the program.

*      The Way of Transforming the Energy

Transformation of the energy is the matter of a particular procedure. This procedure needs a few parts in it to perform all its duty methodically. Few of the parts included into the integrated transmission parts manufacturer, which is used in gear shifting of the four wheelers. In other kinds of transformation-

•    The rear of transmission
•    The gear ratio selection
•    Mounting of the motion speed

All these activities are included in the performance of the whole machinery unite in a motor of a vehicle. The motors and machines are the combinations of some parts, each of which has some particular duty in the total performance of the motor. The transmission parts manufacturer has the clear idea about the work execution of the ingredients.

*      The Types of Duties the Parts Perform

The unit of the engine is made with some parts that execute some particular duty in the entire execution. The power transmission is one of the most important parts of the work procedure of the engine of a motor vehicle. Mostly the high capacity vehicles like tractors, military vehicle and war vehicles need swifter conveyance in its motion.
The elements of the units have to perform


·         The change of the gear easily in requirement within the least time
·         Taking up speed without any interruption in the essential time
·         Having the mounting capacity with higher strength in the highlands or solid material.

*      The Role of the Manufacturers

The transmission parts manufacturer plays a vital role in the whole performance of the device. The more upgraded technology they can invent and use, more powerful transmitters would be available in the market. The high-tech versions of the transformation can provide better power enabled the motor device to the users to their convenience.


A Quick Glance on the Transmission Gears and Shafts.

Transmission is a procedure in which the fuel energy converts into a mechanical energy, which drives forward a car purposefully. Everybody knows that energy is the source of power and power is the potential in any mechanism to run the engine.

v  What is a Transmission?

The transmission is the conversion of the energy, which is derived from the fuel to gear up the speed and motion in a car. This transformation of the energy into useful power fluctuates as per the driving requirement. This change becomes low if the speed is reduced and it becomes high if the vehicle increases its speed. This transmission gears and shafts is a combination of the connection of the engine, gear, and shaft, which are interlinked inside the bonnet.

v  Transmission in the Gears

Gears are usually meant for taking up motion and speed to the car. All the six gears mean several speed manuals and it transmits from lower to higher speed according to the speed capacity of the car. This procedure can change itself from one condition to other with the variant usage of the fuel and power consumption.


This transformation of energy in gear can be manual or automatic. If the transformation is done in the handbook process, then it naturally consumes more power and fuel.

On the other hand, the automatic gear sets a particular speed ratio depending on the load on the carriage. It reduces the fuel consumption as the rate ratio is fixed and does not fluctuate unless the vehicle is set out of the auto gear mode.

v  Transmission in the Shafts

In crankshaft of the engine, the gear is changed automatically. Now the shaft itself is subject to the manual changes because it specifies the direction of the car and is connected to the engine, so the gear. Therefore, the shaft is somehow internally attached to the apparatus through the engine. Therefore, motion and direction are internally and externally connected through the shaft and gear quite correctly.

For the modification of the transmission gears and shafts, it is necessary to continue research on the betterment of the parts of the engine, which regulates all these activities of a vehicle from the core.


Tuesday, 12 September 2017

Gears and Shafts Are Used To Transmit Power

Gears are not only employed in vehicles but also used in almost all the machines. Power shall be forwarded successfully through these gears and shafts. They work in pairs, and one causes multiple rotations in the other. The machine speed depends on the rotation. There are numerous varieties of gears, but many are used with the axis or shafts. The quality depends on the type of raw materials used for manufacturing it. It is better to find both with one manufacturer so that there will not be much pressure in searching. There are numerous applications of these in defense, railway, agriculture and other manufacturing sectors.
In parallel axis type, the gear and the axis of both are identical to each other. They are used in industries, automobiles and rolling mills.

•    In spur, the teeth are parallel to the axis. There is a little noise while working.
•    In helical the teeth are inclined to the shaft to form a helix. They are used in high speed and heavy duty with lesser noise.
•    Double Helical has two sets of teeth in V shape. They are smooth, quiet and efficient.
In perpendicular axis type the shaft is perpendicular to the gear. They are used in elevators, large automobiles, and vehicle mechanism. They are smooth and quiet in operation.
•    In non-intersecting gear, the shafts do not intersect with each other. Power is transmitted in right angle, and the shafts are parallel.
•    In intersecting gear, the gears meet at one point. Most commonly they meet at 90 degrees. The teeth are oblique.
Planetary gear system has three components: planet, the sun, and internal gear. To get multiple speeds, these are used.

In industries and vehicles gears and shafts are used for transmitting power. They decide the speed, direction, and torque of the machine. 

Wednesday, 6 September 2017

Gears and Shafts: The Vital Controller of the Mechanism

Gears and Shafts are the important parts of running a machine in a machine or a vehicle. While the shaft controls are the direction of the vehicle, the gear heads towards the guidance of the force of the motion.
These two parts work together in the motion of a mechanism.
The Roles in the Entire Mechanism
Running a device is a complicated procedure. It needs so many places to be clubbed in the engine to perform the function of driving it according to the demand. In this, the gears are the guides for taking up the turns and directions. And the shafts, take control of that duty. They have two different responsibilities, but the final output is the same. 

The Primary Task of the Gear 
This the vital question what exactly we expect from an active gear? The answer is as following-
    The efficiency and accuracy of the transmission
    The occurrence of the vibratory motion in the system
    The neutral frequencies while transmitting the force
    Noise radiation
    Stability in turns
    Swift whirling of the respective engine parts
These activities must be performed accurately at the level best by a well-performing gear.
Responsibilities of the Shaft
The gears and shafts perform the most important roles in driving a mechanism. While the equipment takes up the charge of transmission, the shaft takes the responsibilities of the following tasks-
    Usually, it becomes the joints of the multiple parts and aims at controlling their performance.
    It usually controls the direction of the machine or a vehicle while the gear transmits the force to take the motion towards the leadership.
    The control of it goes to the wheels and takes charge of their running while driving.

The gears and shafts are continuing to be the essential parts of the mechanism while driving a device manually.

Get an Idea about Transmission Components.

The part of the engine is connected somehow with the parts of the wheel. Everybody knows that the wheels cannot move until the power comes from the engine. The connecting parts of the wheels and the engine transmit the power from the engine to the spinning wheels. Transmission components help in this transformation of the power.

·         How the Transmission Works

The transforming power originates in the engine and gets a pass on to the wheels. It motivates the rotation of the wheels per minute. The arrangements of transmission components are different in the all-wheel driven car; front wheel drove car and back wheel drive the car.


ü  The Parts Used in this System

The parts that help in the transferring the power from the engine to the wheels are-

1. Planetary Set of Gears
This set of gears works in cooperation and contributes to keep up the RPM ratio intact. This system has a set up like our planetary system-a central part (the sun) surrounded by two smaller parts (the planets).

2. Hydraulic System
The hydraulic system helps in controlling the shifting of the gears. At the same time, it monitors the fluid while the transformation of the power.

3. Torque Converter

This part of the transmission component is found on the automatic cars. It takes the job of the clutch in that.

Friday, 25 August 2017

Add speed to your business by choosing the best Engine & Transmission Manufacturer:

The Engine & Transmission manufacturer represents international manufacturers of internal combustion engines as well as on-highway medium- and heavy weight trucks. The company works with government plus industry to aid the nation get its goals of clean air as well as safer roads and to confirm that environmental and security standards and regulations are technically feasible lucrative, also, to provide safety and ecological benefits.

 Through continuing enhancements in Engine & Transmission technology, emissions control as well as security systems, their members are the frontrunners in providing sufficient engine power and harmless vehicles that equally enhance environmental defense and public safety of the global transportation method.
Engine & Transmission manufacturer makings a wide range of produces to suit different applications. It assumes proprietary plus contract manufacturing of petrol as well as diesel engines and transmissions for SUVs, passenger cars and light also medium commercial vehicles. Supple manufacturing abilities allow a mixture of the process- and product-based layouts, on behalf of both batches as well as high volume construction.
The transmissions offer a manual mode that allows the control unit to simulate an automatic transmission package, so the driver doesn’t have to obstruct with gear changes. Though the transmissions have manual transmission such as clutches inside, they do not fit in a clutch pedal inside a car. The clutch pedal act is as well simulated through the computer system. The transmissions can as well have a fluid facility interval and checkup as well as should be serviced rendering to the manufacturer service interval. You can also want to ask them to check on behalf of any software updates or else revisions to make assured your transmission is working the way it should. Those updates can lengthen the life of this transmission several

For further information, you may contact at the link - www.avtec.in

Saturday, 12 August 2017

Gears and Shafts Are Used To Transmit Power

Gears are not only employed in vehicles but also used in almost all the machines. Power shall be forwarded successfully through these gears and shafts. They work in pairs, and one causes multiple rotations in the other. The machine speed depends on the rotation. There are numerous varieties of gears, but many are used with the axis or shafts. The quality depends on the type of raw materials used for manufacturing it. It is better to find both with one manufacturer so that there will not be much pressure in searching. There are numerous applications of these in defense, railway, agriculture and other manufacturing sectors.
In parallel axis type, the gear and the axis of both are identical to each other. They are used in industries, automobiles and rolling mills.

•    In spur, the teeth are parallel to the axis. There is a little noise while working.
•    In helical the teeth are inclined to the shaft to form a helix. They are used in high speed and heavy duty with lesser noise.
•    Double Helical has two sets of teeth in V shape. They are smooth, quiet and efficient.
In perpendicular axis type the shaft is perpendicular to the gear. They are used in elevators, large automobiles, and vehicle mechanism. They are smooth and quiet in operation.
•    In non-intersecting gear, the shafts do not intersect with each other. Power is transmitted in right angle, and the shafts are parallel.
•    In intersecting gear, the gears meet at one point. Most commonly they meet at 90 degrees. The teeth are oblique.
Planetary gear system has three components: planet, the sun, and internal gear. To get multiple speeds, these are used.

In industries and vehicles gears and shafts are used for transmitting power. They decide the speed, direction, and torque of the machine. 

Friday, 11 August 2017

Get an Idea about Transmission Components

The part of the engine is connected somehow with the parts of the wheel. Everybody knows that the wheels cannot move until the power comes from the engine. The connecting parts of the wheels and the engine transmit the power from the engine to the spinning wheels. Transmission components help in this transformation of the power.

·         How the Transmission Works

The transforming power originates in the engine and gets a pass on to the wheels. It motivates the rotation of the wheels per minute. The arrangements of transmission components are different in the all-wheel driven car; front wheel drove car and back wheel drive the car.


ü  The Parts Used in this System

The parts that help in the transferring the power from the engine to the wheels are-

1. Planetary Set of Gears
This set of gears works in cooperation and contributes to keep up the RPM ratio intact. This system has a set up like our planetary system-a central part (the sun) surrounded by two smaller parts (the planets).

2. Hydraulic System
The hydraulic system helps in controlling the shifting of the gears. At the same time, it monitors the fluid while the transformation of the power.

3. Torque Converter

This part of the transmission component is found on the automatic cars. It takes the job of the clutch in that.

Wednesday, 9 August 2017

Gears and Shafts: The Vital Controller of the Mechanism

Gears and Shafts are the important parts of running a machine in a machine or a vehicle. While the shaft controls are the direction of the vehicle, the gear heads towards the guidance of the force of the motion.

These two parts work together in the motion of a mechanism.

The Roles in the Entire Mechanism
Running a device is a complicated procedure. It needs so many places to be clubbed in the engine to perform the function of driving it according to the demand. In this, the gears are the guides for taking up the turns and directions. And the shafts, take control of that duty. They have two different responsibilities, but the final output is the same.

The Primary Task of the Gear


This the vital question what exactly we expect from an active gear? The answer is as following-
    The efficiency and accuracy of the transmission
    The occurrence of the vibratory motion in the system
    The neutral frequencies while transmitting the force
    Noise radiation
    Stability in turns
    Swift whirling of the respective engine parts
These activities must be performed accurately at the level best by a well-performing gear.

Responsibilities of the Shaft

The gears and shafts perform the most important roles in driving a mechanism. While the equipment takes up the charge of transmission, the shaft takes the responsibilities of the following tasks-
    Usually, it becomes the joints of the multiple parts and aims at controlling their performance.
    It usually controls the direction of the machine or a vehicle while the gear transmits the force to take the motion towards the leadership.
    The control of it goes to the wheels and takes charge of their running while driving.

The gears and shafts are continuing to be the essential parts of the mechanism while driving a device manually.



Tuesday, 8 August 2017

A Brief Concept on Transmission for the Commercial Vehicle

  • The primary purpose of the commercial vehicle is to get some profit out of the service of the vehicle. Due to this reason, consumption of less amount of fuel without any damage in the parts of the car is necessary. In this matter, transmission for the commercial vehicle plays a vital role. Why? The reason is there are two kinds of communications in any carriage:
        Manual
        Automatic

    Why Use Manual Transmission?

    The manual one is required to control the gear and shaft manually, as per the wise of the driver. Light loaded private carriages with passengers use this kind of transformation in the gear changes. In the matter of commercial carriages, as most of the time, they are filled with heavy loads either by passengers or by goods, it's better to avoid the manual transformation in the motion, speed and in taking up the direction.


    A Few Facts about Automatic Transmission

    The automatic procedure ensures the gearing up the speed and motion automatically and intends to stick with a particular rate of speed while carrying heavy loads inside the carriage. Quite naturally, the carriages, which carry heavy loads, start to derive much strength to head forward or to have a reverse. In this situation, if the automatic procedure is selected, then it sets an average speed and power in the motion of the carriage and makes the drive safer and easier.

    Why Manual Procedure to be Avoided in Commercial Vehicle?

    It is already discussed that the main purpose of the commercial carriages is to gain the profit out of the drive without having any damage in the parts or fuel consumption. In the manual procedure, the engine intends to consume more fuel because it keeps on changing the gear as well as the strength and speed. This ever-changing method needs more power, and it is derived naturally from the fuel.

    On the other hand, the automatic procedure sets a particular motion and speed, which ensures an appropriate amount of fuel consumption. It saves more fuel consumption than the manual one. Therefore, the automatic procedure is the best transmission for the commercial vehicle.




Monday, 31 July 2017

Gears and shafts are essential to most industries.

Between Gears and shafts, the shaft should come first because pulleys and gears are usually mounted on a shaft. The shaft is normally circular and elongated and rotates while transmitting power across the different parts of the machine structure. The shaft could also communicate power after it is produced mechanically by a machine that absorbs the power.

Between the two varieties of shafts, counter shafts and also line shafts transmit power between the sources that produces power to the machine that is absorbing the power. On the other hand, machine shafts are different because they constitute a part of the machine itself like crankshafts.
Common sense indicates that a huge manufacturing industry is busy each day to produce the different kinds of shafts essential to the efficient running of machinery. Mild steel is the material used in making the usual shafts. Shafts of greater strength would be made of alloy steel such as nickel or nickel-chromium. Chromium-vanadium steel may also be used. The processes involved in making shafts are hot rolling, while finishing to size requires cold drawing, turning and grinding.
Just like shafts, gears are also common machine parts used in everyday life. Gears help to change the rotation rate of a shaft in the machine. Gears also help to change the direction of rotation and can transform the rotary movement into linear movement. Depending upon patterns, sizes, designs and uses, we have spur gears and helical gears, worm gears, etc. Some other gears are internal and external gears which are very important too and serve a variety of purposes.
Internal gears have teeth on the inner cylinder which is hollow and offers low sliding and high-stress loading. They may be used in rollers and timing applications.

External gears have teeth on the outer surface of the cone, a popular and simple gear system. Mining and paper-making equipment use them.  Gears and shafts are the like the nuts and bolts of machinery. 

Saturday, 29 July 2017

There are a few transmission components that help to execute the entire action and results into fulfilling its actual purpose.

The transmission is the act of transformation of the energy into such a power, which can drive a vehicle through motion. Usually, the battery is the storage of energy in a vehicle. This energy is used for the transformation into power with the help of the fuel energy. The change is not easy, but it is done in a quite complicated way and through some machinery. In this procedure of transformation, fuel energy is transmitted into some electric energy to run the engine.
  • The Transmission Procedure
The procedure of this method is a bit step related. There are a few transmission components that help to execute the entire action and results into fulfilling its actual purpose. Those components controls following transmissions-
tpartsplus
  1. The Set of Gears
The speed ratio is controlled through the gears. The transferable elements also monitor the activity of the gears that regulated the up gradation of the motion of the vehicle.
  1. Hydraulic System
This system is controlled by one of the transferable element, which is derived from the fluid in the oil chamber. This transmission controls the bend and pressure of the clutches in the vehicle.
  1. The Safety of the Gaskets
The transferable elements also manage the seals of the oil tank and ensure its safety from leaking out.
  1. Torque Transmitter
The torque transmitter allows mounting the clutch to stop the vehicle while running on some gear.
  1. Computing
It helps to shift the direction of the vehicle with the electrical solenoid to keep the change of the flow of the oil into its exact location to run the machine continually.
  • The Work on the Elements
The present world is the world of betterment. It’s the duty of the manufacturer to work for the betterment of the transmission components. If these items are of the high quality and installed in the correct manner, then it can give the desired and even the better result in the normal execution of the purpose. The elements have to be used and maintained in the methodical way to gain the best result from it. The duty belongs to both the user and the manufacturer.

Tuesday, 25 July 2017

Get an Idea about Transmission Components.

The part of the engine is connected somehow with the parts of the wheel. Everybody knows that the wheels cannot move until the power comes from the engine. The connecting parts of the wheels and the engine transmit the power from the engine to the spinning wheels. Transmission components help in this transformation of the power.
12_Eaton_6106_21.jpg
  • How the Transmission Works
The transforming power originates in the engine and gets a pass on to the wheels. It motivates the rotation of the wheels per minute. The arrangements of transmission components are different in the all-wheel driven car; front wheel drove car and back wheel drive the car.
  • The Parts Used in this System
The parts that help in the transferring the power from the engine to the wheels are-
  1. Planetary Set of Gears
This set of gears works in cooperation and contributes to keep up the RPM ratio intact. This system has a set up like our planetary system-a central part (the sun) surrounded by two smaller parts (the planets).
  1. Hydraulic System
The hydraulic system helps in controlling the shifting of the gears. At the same time, it monitors the fluid while the transformation of the power.
  1. Torque Converter
This part of the transmission component is found on the automatic cars. It takes the job of the clutch in that.